nelly

i would like to fit a new crankshaft pulley wheel(c p w). one with tdc, bdc and numbers on, you know the type. is it a case of just lining tdc taking it off and putting the new one on. thanks

jinx

it has a key way so (in theory) you cant get it wrong!

__________________
im always available on 07951 007431!

wanted
t4 flywheel - not 228mm

36hp fanshroud for t/p t1?

http://www.bus-types.co.uk

http://www.dubtypes.co.uk - shrewsburys vdubya club
meeting at the Red barn from 8pm.

The address is:
The Red barn
108 Longden Rd,
Shrewsbury,
Shropshire,
SY3 7HS
01743 362503


Click the link below for directions;

http://www.streetmap.co.uk/newmap.sr...11413&z=0&ar=Y






http://www.klassicfab.com

Tricky

there are cheap ones about too that warp ! I think some were going about printed 180deg out too

buy a decent new one

__________________
Pet stuff

jinx

if you want a deicent one, fit an original one

__________________
im always available on 07951 007431!

wanted
t4 flywheel - not 228mm

36hp fanshroud for t/p t1?

http://www.bus-types.co.uk

http://www.dubtypes.co.uk - shrewsburys vdubya club
meeting at the Red barn from 8pm.

The address is:
The Red barn
108 Longden Rd,
Shrewsbury,
Shropshire,
SY3 7HS
01743 362503


Click the link below for directions;

http://www.streetmap.co.uk/newmap.sr...11413&z=0&ar=Y






http://www.klassicfab.com

Tricky

__________________
Pet stuff

nelly

i was thinkin about getting one from machine 7 , about £30 yes or no

cliom

Scat ones are good. but not cheap

The cheaper 20-25 quid ones the numers(lettering) can and does come off....

But no you cant really go wrong fitting one.

camper dave

Someone in my club had a cheap on crack and shatter, they now run a standard vw one!

nelly

cheers for the replys will keep standard one